Moulded Boots

HellermannTyton, right angle VG style lipped boot with rib, low profile, high ratio. This style provides connector cable strain relief. Used in applications for partially loaded connectors with small cable diameters.The tail is designed to allow easy...

HellermannTyton, right angle, MIL style adhesive lined lipped boot with rib. This style provides strain relief for harnesssy stems when used in conjunction with circular grooved adaptor. The pre-applied W24 adhesive is a high performance, 1 part epoxy...

HellermannTyton, bottle shape adhesive lined straight lipped boot with circular grooved adaptor for strain relief. The pre-applied W24 adhesive is a high performance, 1 part epoxy with an operating temperature range of -75 to +200 °C...

HellermannTyton, Helashrink 100 series bottle shape, straight boot without lip - non glued This style provides connector cable strain relief. Can be installed on the connector rear thread or plain shaft and allows easy re-entry for repair when combined...

HellermannTyton, right angle, VG style adhesive lined lipped boot with rib. This style provides strain relief for harnesssy stems when used in conjunction with circular grooved adaptor. The pre-applied W24 adhesive is a high performance, 1 part epoxy...

HellermannTyton, bottle shape adhesive lined straight lipped boot with circular grooved adaptor for strain relief. The pre-applied W24 adhesive is a high performance, 1 part epoxy with an operating temperature range of -75 to +200 °C...

HellermannTyton, Helashrink 100 series bottle shape, straight boot without lip - non glued This style provides connector cable strain relief. Can be installed on the connector rear thread or plain shaft and allows easy re-entry for repair when combined...

HellermannTyton 1230-1-G non-glued moulded T boot Equivalent of Raychem 301A028-25-0 Note that this boot is not pre-glued. Glue such as Resintech RT125 is recommended.  

Heat shrinkable moulded T boot for use in electrical and electronic cable harness applications. Features 4-way outlet shape Cable sealing, strain relief and mechanical protection   Equivalent of Raychem 301A011-25-0 Note that this boot is not...

Heat shrinkable moulded T boot for use in electrical and electronic cable harness applications. Features 4-way outlet shape Cable sealing, strain relief and mechanical protection Equivalent of Raychem 322A112-25-0 Note that this boot is not pre-glued...

HellermannTyton 1202-1-G non-glued moulded T boot   Equivalent of Raychem 301A022-25-0 Note that this boot is not pre-glued. Glue such as Resintech RT125 is recommended.  

HellermannTyton, bottle shape adhesive lined straight lipped boot with circular grooved adaptor for strain relief. The pre-applied W24 adhesive is a high performance, 1 part epoxy with an operating temperature range of -75 to +200 °C...