Description
Xspurt 1000cc long nose unmodified fuel injector
Dynamically flow tested in New Zealand by us, Motorsport Electronics (MSEL), so that your set of injectors is matched within 1% across the entire set.
- 1000cc/min at 3 bar (43.5psi)
- Suitable for use with ethanol, methanol as well as most oil based fuels
- Modern design offering extremely good idle control
- Full injector deadtime/battery compensation information is supplied with each set of injectors
- High impedance (high resistance) so no need to add ballast resistors on some ECUs
- Can be supplied with lower adaptors to fit most 14mm lower o-ring applications
- Unmodified bosch injector
- Multi-hole spray pattern
- Common replacement for EVO X Injectors
- Also referred to as Bosch 980cc (at 3-bar) or 1150cc (at 4-bar)
Deadtime / battery compensation information supplied with each set of fuel injectors
Please note that non-standard injector length options are not available. Variations of injector caps will create 3/4 length and traditional full length injectors.
