14mm Injector O-Ring

Medium Injector Extension Cap to take a 38mm short/stubby injector to 3/4 length. Has 14mm top o-ring to fit most Aftermarket fuel rails. Includes filter basket. 11mm also available

11mm Injector O-Ring Use with injectors with a 11mm top. Would suit most Japanese style top feed injectors Suitable for all fuels

Medium Injector Extension Cap to take a 38mm short/stubby injector to 3/4 length. Has 11mm top o-ring to fit most Japanese fuel rails. Supplied with retaining clip to secure extension cap to injector...

Long Injector Extension Cap to take a 38mm short/stubby injector to full length. Has 14mm top o-ring to fit most Aftermarket fuel rails. Supplied with retaining clip to secure Cap to Injector 11mm...

Siemens 875cc High Resistance Injector with 11mm Top O-Ring Big brother to the popular 60lb Siemens injector. Modified by Motorsport Electronics to have an 11mm top o-ring. Designed to fit common...

Injector Seal - Lower - For Nissan Top Feed Injectors - 14mm OD Square Section 14mm OD suitable for Nissan RB engines Suitable for all fuels

Extension cap for 58mm 3/4 length fuel injector. extends injector to traditional 70mm length provides 14mm head to fit into fuel rail includes fitted filter basket recommended as most modern...

Siemens 668cc High Resistance Fuel Injector with 11mm Top O-Ring These injectors flow 60 lbs/hr at 43.5 PSI ( 3 BAR ) and up to 85 lbs/hr at 87 PSI! In addition, these units are high-impedance so no...

Lower Injector Cap to make Long Pintle Injector useable in situations where a 14mm lower o-ring is required. Takes Xspurt 1000cc Long Pintle Injector to a 3/4 length, add an additional top extension...