Injectors By Flow Rate
All injectors are dynamically flow tested in New Zealand by us, Motorsport Electronics (MSEL) before shipping so that your set of injectors is matched within 1% across the entire set.
All injectors are dynamically flow tested in New Zealand by us, Motorsport Electronics (MSEL) before shipping so that your set of injectors is matched within 1% across the entire set.

Unmodified Bosch 347cc injector, single-cone spray, 14mm top and bottom o-rings. Stubby injector; a lower adaptor extends it to 3/4 length, limiting cap choice. High impedance needs no ballast resistor; flow matched within 1% per set.
INJBOS347L
From (Incl. GST)
| Qty 1+ | $92.50 ($106.37) |
| Qty 10+ | $87.88 ($101.06) |
| Qty 20+ | $83.25 ($95.74) |
| Qty 30+ | $80.94 ($93.08) |

From (Incl. GST)
| Qty 1+ | $92.50 ($106.37) |
| Qty 10+ | $87.88 ($101.06) |
| Qty 20+ | $83.25 ($95.74) |
| Qty 30+ | $80.94 ($93.08) |
INJBOS347L

Unmodified Bosch 381cc stubby injector, 14mm top and bottom o-rings. Factory-fit injector for Holden 6.0L engines, deadtime/battery compensation data supplied.
INJBOS381S
From (Incl. GST)
| Qty 1+ | $102.50 ($117.87) |
| Qty 10+ | $97.38 ($111.99) |
| Qty 20+ | $92.25 ($106.09) |
| Qty 30+ | $89.69 ($103.14) |

From (Incl. GST)
| Qty 1+ | $102.50 ($117.87) |
| Qty 10+ | $97.38 ($111.99) |
| Qty 20+ | $92.25 ($106.09) |
| Qty 30+ | $89.69 ($103.14) |
INJBOS381S

Direct-fit 381cc LS3/LS7/LSA/L76/L99 injector set, flows about 448cc/min at 58psi GM pressure. No electrical, plug or o-ring adapters needed; flow matched within 1% per set. 38mm body; suitable for ethanol, methanol and most oil-based fuels.
INJLS3381
Our Price (Incl. GST)
| Qty 1+ | $779.00 ($895.85) |
| Qty 3+ | $740.05 ($851.06) |
| Qty 10+ | $720.58 ($828.67) |

Our Price (Incl. GST)
| Qty 1+ | $779.00 ($895.85) |
| Qty 3+ | $740.05 ($851.06) |
| Qty 10+ | $720.58 ($828.67) |
INJLS3381

Genuine Bosch 440cc injector, twin spray, ideal for Ford Falcon XR6 Turbo upgrades. Frequently counterfeited from China with poor performance; buy only from a reputable supplier. Full-length with 14mm o-rings both ends; flow matched within 1% per set.
INJBOS440F
From (Incl. GST)
| Qty 1+ | $102.50 ($117.87) |
| Qty 10+ | $97.38 ($111.99) |
| Qty 20+ | $92.25 ($106.09) |
| Qty 30+ | $89.69 ($103.14) |

From (Incl. GST)
| Qty 1+ | $102.50 ($117.87) |
| Qty 10+ | $97.38 ($111.99) |
| Qty 20+ | $92.25 ($106.09) |
| Qty 30+ | $89.69 ($103.14) |
INJBOS440F

Xspurt 525cc stubby injector, 38mm body, multi-hole spray pattern. Flow matched within 1% per set; deadtime/battery compensation data supplied. Deadtime setup data available for Cobb, Haltech, MoTeC, Link and other major ECUs.
INJXP525S
From (Incl. GST)
| Qty 1+ | $112.50 ($129.38) |
| Qty 10+ | $106.88 ($122.91) |
| Qty 20+ | $101.25 ($116.44) |
| Qty 30+ | $98.44 ($113.21) |

From (Incl. GST)
| Qty 1+ | $112.50 ($129.38) |
| Qty 10+ | $106.88 ($122.91) |
| Qty 20+ | $101.25 ($116.44) |
| Qty 30+ | $98.44 ($113.21) |
INJXP525S

Direct-fit 525cc LS3/LS7/LSA/L76/L99 injector set, flows about 568cc/min at 58psi GM pressure. No electrical, plug or o-ring adapters needed; flow matched within 1% per set. 38mm stubby body; suitable for ethanol, methanol and most oil-based fuels.
INJLS3525
Our Price (Incl. GST)
| Qty 1+ | $855.00 ($983.25) |
| Qty 3+ | $812.25 ($934.09) |
| Qty 10+ | $790.88 ($909.51) |

Our Price (Incl. GST)
| Qty 1+ | $855.00 ($983.25) |
| Qty 3+ | $812.25 ($934.09) |
| Qty 10+ | $790.88 ($909.51) |
INJLS3525

Unmodified Bosch 525cc injector, 58mm 3/4-length body, USCAR/EV14 electrical connector. Sometimes sold elsewhere as 550cc/min; mating connector optional at purchase. Deadtime setup data available for Cobb, Haltech, MoTeC, Link and other major ECUs.
INJBOS525M
From (Incl. GST)
| Qty 1+ | $89.00 ($102.35) |
| Qty 10+ | $84.55 ($97.23) |
| Qty 20+ | $80.10 ($92.11) |
| Qty 30+ | $77.88 ($89.56) |

From (Incl. GST)
| Qty 1+ | $89.00 ($102.35) |
| Qty 10+ | $84.55 ($97.23) |
| Qty 20+ | $80.10 ($92.11) |
| Qty 30+ | $77.88 ($89.56) |
INJBOS525M

Bosch 3/4-length injector with Junior Timer/EV1 connector, dual-cone spray, E85 compatible. Check clearances and measurements before purchasing; can replace Porsche 997 injectors.
INJBOS627N
From (Incl. GST)
| Qty 1+ | $102.50 ($117.87) |
| Qty 10+ | $97.38 ($111.99) |
| Qty 20+ | $92.25 ($106.09) |
| Qty 30+ | $89.69 ($103.14) |

From (Incl. GST)
| Qty 1+ | $102.50 ($117.87) |
| Qty 10+ | $97.38 ($111.99) |
| Qty 20+ | $92.25 ($106.09) |
| Qty 30+ | $89.69 ($103.14) |
INJBOS627N

Xspurt 640cc injector, 58mm 3/4-length body with multi-hole spray pattern. Includes your choice of injector cap and a USCAR electrical connector. Flow matched within 1% per set; deadtime/battery compensation data supplied.
INJXP640M
From (Incl. GST)
| Qty 1+ | $95.00 ($109.25) |
| Qty 10+ | $90.25 ($103.79) |
| Qty 20+ | $85.50 ($98.32) |
| Qty 30+ | $83.13 ($95.60) |

From (Incl. GST)
| Qty 1+ | $95.00 ($109.25) |
| Qty 10+ | $90.25 ($103.79) |
| Qty 20+ | $85.50 ($98.32) |
| Qty 30+ | $83.13 ($95.60) |
INJXP640M

Xspurt 650cc full-length injector, flows 700cc/min at 3 bar, 820cc/min at 4 bar. 14mm o-rings both ends; won't fit Japanese fuel rails without modification. Replaces the discontinued Siemens Deka 60lb injector, flow matched within 1%.
INJXP650F
From (Incl. GST)
| Qty 1+ | $109.00 ($125.35) |
| Qty 10+ | $103.55 ($119.08) |
| Qty 20+ | $98.10 ($112.81) |
| Qty 30+ | $95.38 ($109.69) |

From (Incl. GST)
| Qty 1+ | $109.00 ($125.35) |
| Qty 10+ | $103.55 ($119.08) |
| Qty 20+ | $98.10 ($112.81) |
| Qty 30+ | $95.38 ($109.69) |
INJXP650F

Bosch 720cc top-feed injector, direct fitment for Nissan NEO engines, no adapters needed. Top-feed only; won't fit side-feed applications unless the rail and head change. Nippon Denso high-keyway connector; already characterised in MoTeC M1 systems.
INJBOS720M
From (Incl. GST)
| Qty 1+ | $102.50 ($117.87) |
| Qty 10+ | $97.38 ($111.99) |
| Qty 20+ | $92.25 ($106.09) |
| Qty 30+ | $89.69 ($103.14) |

From (Incl. GST)
| Qty 1+ | $102.50 ($117.87) |
| Qty 10+ | $97.38 ($111.99) |
| Qty 20+ | $92.25 ($106.09) |
| Qty 30+ | $89.69 ($103.14) |
INJBOS720M

Xspurt 725cc injector, 58mm body; adapter cap extends to 70mm with 11/14mm o-ring. Popular on late-model VE Commodores and FG Falcons; genuine Delphi/Aptiv USCAR connector. Deadtime setup data available for Cobb, Haltech, MoTeC, Link and other major ECUs.
INJXP725M
From (Incl. GST)
| Qty 1+ | $112.50 ($129.38) |
| Qty 10+ | $106.88 ($122.91) |
| Qty 20+ | $101.25 ($116.44) |
| Qty 30+ | $98.44 ($113.21) |

From (Incl. GST)
| Qty 1+ | $112.50 ($129.38) |
| Qty 10+ | $106.88 ($122.91) |
| Qty 20+ | $101.25 ($116.44) |
| Qty 30+ | $98.44 ($113.21) |
INJXP725M