All injectors are dynamically flow tested in New Zealand by us, Motorsport Electronics (MSEL) before shipping so that your set of injectors is matched within 1% across the entire set.
Genuine Bosch 730cc stubby injector, purchased directly from Bosch, 14mm top/bottom o-rings. Multi-hole spray pattern; flow matched within 1% across each set. Deadtime setup data available for Cobb, Haltech, MoTeC, Link and other major ECUs.
INJBOS730S
Our Price (Incl. GST)
| Qty 1+ | $89.00 ($102.35) |
| Qty 10+ | $84.55 ($97.23) |
| Qty 20+ | $80.10 ($92.11) |
| Qty 30+ | $77.88 ($89.56) |
Our Price (Incl. GST)
| Qty 1+ | $89.00 ($102.35) |
| Qty 10+ | $84.55 ($97.23) |
| Qty 20+ | $80.10 ($92.11) |
| Qty 30+ | $77.88 ($89.56) |
INJBOS730S
Direct-fit 730cc LS3/LS7/LSA/L76/L99 injector set, flows about 876cc/min at 58psi GM pressure. No electrical, plug or o-ring adapters needed; flow matched within 1% per set. 38mm stubby body; suitable for ethanol, methanol and most oil-based fuels.
INJLS3730
Our Price (Incl. GST)
| Qty 1+ | $679.00 ($780.85) |
| Qty 3+ | $645.05 ($741.81) |
| Qty 10+ | $628.08 ($722.29) |
Our Price (Incl. GST)
| Qty 1+ | $679.00 ($780.85) |
| Qty 3+ | $645.05 ($741.81) |
| Qty 10+ | $628.08 ($722.29) |
INJLS3730
Unmodified Bosch 731cc injector, single-cone spray, 14mm top and bottom o-rings. Stubby injector; a lower adaptor extends it to 3/4 length, limiting cap choice. High impedance needs no ballast resistor; flow matched within 1% per set.
INJBOS731L
Our Price (Incl. GST)
| Qty 1+ | $95.00 ($109.25) |
| Qty 10+ | $90.25 ($103.79) |
| Qty 20+ | $85.50 ($98.32) |
| Qty 30+ | $83.13 ($95.60) |
Our Price (Incl. GST)
| Qty 1+ | $95.00 ($109.25) |
| Qty 10+ | $90.25 ($103.79) |
| Qty 20+ | $85.50 ($98.32) |
| Qty 30+ | $83.13 ($95.60) |
INJBOS731L
731cc kit for 6-cylinder top-feed Japanese engines, flows 740cc/min at 3 bar. Traditional 70mm length; may not fit newer engines using stubby or 3/4-length injectors. Includes Nissan/Toyota lower seals; not for side-feed engines without a rail adapter.
INJJAP6731
Our Price (Incl. GST)
| Qty 1+ | $675.00 ($776.25) |
| Qty 3+ | $641.25 ($737.44) |
| Qty 10+ | $624.38 ($718.04) |
Our Price (Incl. GST)
| Qty 1+ | $675.00 ($776.25) |
| Qty 3+ | $641.25 ($737.44) |
| Qty 10+ | $624.38 ($718.04) |
INJJAP6731
Bosch 731cc drop-in injector set for Ford Falcon BA/BF, excellent spray pattern. Double filters protect the new injectors; not designed for later FG Falcons. HP Tuners and SCT tuning data available; flow matched within 1% per set.
INJFBA731
Our Price (Incl. GST)
| Qty 1+ | $675.00 ($776.25) |
| Qty 3+ | $641.25 ($737.44) |
| Qty 10+ | $624.38 ($718.04) |
Our Price (Incl. GST)
| Qty 1+ | $675.00 ($776.25) |
| Qty 3+ | $641.25 ($737.44) |
| Qty 10+ | $624.38 ($718.04) |
INJFBA731
Ford Falcon FG 731cc direct fit fuel injector set Drop in replacement injector set. No additional parts are required. Bosch non-modified fuel injector - excellent spray pattern high resistance injector so no ballast resistors required Please note that this injector kit is not designed for the earlie…
INJFFG731
Our Price (Incl. GST)
| Qty 1+ | $650.00 ($747.50) |
| Qty 3+ | $617.50 ($710.13) |
| Qty 10+ | $601.25 ($691.44) |
Our Price (Incl. GST)
| Qty 1+ | $650.00 ($747.50) |
| Qty 3+ | $617.50 ($710.13) |
| Qty 10+ | $601.25 ($691.44) |
INJFFG731
731cc injector kit for Mitsubishi EVO 1 through 9, not the EVO X. Same OEM electrical connectors, no adapters or loom cutting; new lower seal included. Fits Nissan SR20 and Toyota 4AGE/3SGTE too, though 3SGTE needs a connector change.
INJEVO19731
Our Price (Incl. GST)
| Qty 1+ | $460.00 ($529.00) |
| Qty 3+ | $437.00 ($502.55) |
| Qty 10+ | $425.50 ($489.33) |
Our Price (Incl. GST)
| Qty 1+ | $460.00 ($529.00) |
| Qty 3+ | $437.00 ($502.55) |
| Qty 10+ | $425.50 ($489.33) |
INJEVO19731
Xspurt 1000cc stubby injector, 38mm body, 1000cc/min at 3 bar (43.5psi). High impedance design needs no ballast resistor; direct fitment for Chev LS3 engines. Choose your adapter cap and electrical connector; deadtime data available for major ECUs.
INJXP1000S
Our Price (Incl. GST)
| Qty 1+ | $122.50 ($140.88) |
| Qty 10+ | $116.38 ($133.84) |
| Qty 20+ | $110.25 ($126.79) |
| Qty 30+ | $107.19 ($123.27) |
Our Price (Incl. GST)
| Qty 1+ | $122.50 ($140.88) |
| Qty 10+ | $116.38 ($133.84) |
| Qty 20+ | $110.25 ($126.79) |
| Qty 30+ | $107.19 ($123.27) |
INJXP1000S
Direct-fit 1000cc LS3/LS7/LSA/L76/L99 injector set, flows about 1196cc/min at 58psi GM pressure. No electrical, plug or o-ring adapters needed; flow matched within 1% per set. 38mm stubby body; suitable for ethanol, methanol and most oil-based fuels.
INJLS31000
Our Price (Incl. GST)
| Qty 1+ | $945.00 ($1,086.75) |
| Qty 3+ | $897.75 ($1,032.41) |
| Qty 10+ | $874.13 ($1,005.25) |
Our Price (Incl. GST)
| Qty 1+ | $945.00 ($1,086.75) |
| Qty 3+ | $897.75 ($1,032.41) |
| Qty 10+ | $874.13 ($1,005.25) |
INJLS31000
Xspurt 1000cc injector, 58mm 3/4-length body; one of MSEL's most popular injectors. Popular on 2000cc turbocharged engines running E85; adapter cap available for 70mm length. Deadtime setup data available for Cobb, Haltech, MoTeC, Link and other major ECUs.
INJXP1000M
Our Price (Incl. GST)
| Qty 1+ | $112.50 ($129.38) |
| Qty 10+ | $106.88 ($122.91) |
| Qty 20+ | $101.25 ($116.44) |
| Qty 30+ | $98.44 ($113.21) |
Our Price (Incl. GST)
| Qty 1+ | $112.50 ($129.38) |
| Qty 10+ | $106.88 ($122.91) |
| Qty 20+ | $101.25 ($116.44) |
| Qty 30+ | $98.44 ($113.21) |
INJXP1000M
Bosch 1000cc drop-in injector set for Ford Falcon BA/BF, same OEM connector fit. Double filters protect the new injectors; not designed for later FG Falcons. HP Tuners and SCT tuning data available; flow matched within 1% per set.
INJFBA1000
Our Price (Incl. GST)
| Qty 1+ | $725.00 ($833.75) |
| Qty 3+ | $688.75 ($792.06) |
| Qty 10+ | $670.63 ($771.22) |
Our Price (Incl. GST)
| Qty 1+ | $725.00 ($833.75) |
| Qty 3+ | $688.75 ($792.06) |
| Qty 10+ | $670.63 ($771.22) |
INJFBA1000
1000cc injector kit for Mitsubishi EVO 1 through 9, not the EVO X. Same OEM electrical connectors, no adapters or loom cutting; new lower seal included. Fits Nissan SR20 and Toyota 4AGE/3SGTE too, though 3SGTE needs a connector change.
INJEVO191000
Our Price (Incl. GST)
| Qty 1+ | $490.00 ($563.50) |
| Qty 3+ | $465.50 ($535.32) |
| Qty 10+ | $453.25 ($521.24) |
Our Price (Incl. GST)
| Qty 1+ | $490.00 ($563.50) |
| Qty 3+ | $465.50 ($535.32) |
| Qty 10+ | $453.25 ($521.24) |
INJEVO191000
