MoTeC STW195 Steering Wheel
The MoTeC STW195 is a professional motorsport steering wheel with an integrated, glare-resistant 5" high resolution colour display, built and tested to FIA specifications with a robust carbon fibre body and paddles. A multi-award winner on debut at PMW Expo and PRI Show, the STW195 was developed with input from professional FIA series drivers, with each component selected for quality, comfort and ease of operation.
The screen layout and built-in LEDs are fully customisable using MoTeC software, with Display Creator and C125 I/O included as standard.
Specifications:
- 7 x 12 position rotary dials
- 6 x paddles (4 x on/off and 2 x analogue 0-5V)
- 12 x on/off push buttons, including 1 x dedicated radio PTT button
- 16 x configurable full colour (RGB) LEDs
Features:
- C125 Display Creator included
- C125 I/O included
- Full carbon fibre body
- Krontec quick release system
- High resolution 125 mm (approx. 5") colour LCD display, high brightness for sunlight readability
- Complete customisation of screen layouts via included Display Creator
- 16 full colour (RGB) LEDs; colour, function and intensity are fully programmable
- FIA marshalling LEDs for sanctioned events
- Dedicated radio PTT loop button
- HVIL (High Voltage Inter Lock) loop
- Labelling options included
- Optional internal logging
- Easily integrates with CAN based devices
- GPS lap timing
- Supports T2 Telemetry (with upgrade)
Specifications
| Screen: |
Colour TFT LCD, anti-reflective |
| Resolution: |
800 x 480, anti-aliased graphics |
| LEDs: |
16 x configurable LEDs |
| Fixed Layouts: |
Selectable fixed layouts |
| Custom Layouts: |
Fully customisable display layouts with included Display Creator software |
| Message Lines: |
48 user-defined, scrollable message lines with programmable overrides |
| Modes: |
3 programmable modes with customisable labels |
| Memory: |
120 MB internal logging memory |
| Logging Rate: |
Up to 500 samples per second |
| Download: |
Fast Ethernet download |
| Analysis: |
i2 Standard data analysis software included (Pro Analysis upgrade available) |
[1] Logging is optional and requires upgrades.
| Push Buttons: |
12 x on/off push buttons including 1 x dedicated radio PTT button |
| Rotary Dials: |
7 x 12 position rotary dials |
| On/Off Paddles: |
4 x on/off paddles |
| Analogue Paddles: |
2 x analogue 0-5V paddles |
| Accelerometer: |
3-axis, detection range +/- 5G |
| Temperature: |
Dash temperature sensor |
| Voltage: |
Sensor supply voltage, battery voltage |
| CAN: |
2 x CAN buses: 1 x configurable with programmable CAN bus speed, 1 x reserved |
| RS232: |
1 x RS232 port with transmit and receive |
| Ethernet: |
1 x Ethernet for programming / data logging |
| Operating Voltage: |
6 to 17V DC |
| Operating Current: |
0.8A typical at 14V (backlight and all LEDs at 100% brightness) |
| Protection: |
Reverse battery protection, battery transient protection |
| Internal: |
-20°C to 70°C (above 60°C maximum backlight brightness progressively reduced) |
| Typical Ambient: |
-10°C to 55°C in free air |
| Material: |
Full carbon fibre body |
| Quick Release System: |
Krontec QR-30-22P-LW-V |
| Size: |
Width ≤302mm, Height ≤191mm |
| Weight: |
1940g including quick release system |
| Connector: |
1 x 22 pin Autosport connector |
| UNECE: |
Regulation No. 10 (ECE R10) |
| LV124: |
Sine wave scan, design validation shock, pre-defined vibration stress |
| ISO 16750-4: |
Low and high temp storage, low and high temp operating, temperature cycling, thermal shock |
| IP Rating[2]: |
IP65 (dust and water) |
[2] IP rating is dependant upon the user ensuring that the connector entries are waterproof, which, as a minimum, requires all unused wire cavities on the connector to be plugged.
Mating connector: 22 pin Autosport connector, CONAS11235SN.
